Swiss Arms Programmable Burst Mosfet V2

$21.99
Not yet rated

Availability: In Stock

Product Code:AC-UP-SA-603364

Manufacturer:BOL Battery Chargers

Details

Swiss Arms Programmable Burst Mosfet V2
Features:
- Progammable 2-12 Shots and Burst Fire
- 7.4 and 11.1 lipo Compatible
- 8.4 and 9.6 Nimh/Nicad Compatible
- 4 Settings for Optimal Performance at Any Voltage

Instructions:
Step 1 - Long press the button on the Mosfet for 5 seconds till the LED lights up and then release the button. The light will remain lit up for 5 seconds.

Step 2 - You must Short press 1 time (while the LED is still on) and the light will blink 1 time signaling now it is on MODE 1.

Step 3 - To finish your selection of MODE 1, you need to Long press the button for 5 seconds, till the light go off on the Mosfet, signaling the MODE 1 selection is complete.

Note: If you forget which MODE you configured or you want to double confirm you are in the right MODE, simply short press the button to see how many times the LED light blinks on your Mosfet, after the Step 3 has been completed.

MODE 2 selection (7.4v):

Step 1 - Long press the button on the Mosfet for 5 seconds till the LED lights up and then release the button. The light will remain lit up for 5 seconds.

Step 2 - You must Short press 1 time (while the LED is still on) and the light will blink 1 time.

Step 3 - Short press 1 more time and the light will blink 2 times signaling now it is on MODE 2.

Step 4 - To finish your selection of MODE 2, you need to Long press the button for 5 seconds, till the light go off on the Mosfet, signaling the MODE 2 selection is complete.

Note: If you forget which MODE you configured or you want to double confirm you are in the right MODE, simply short press the button to see how many times the LED light blinks on your Mosfet, after the Step 3 has been completed.

MODE 3 selection (8.4v):

Step 1 - Long press the button on the Mosfet for 5 seconds till the LED lights up and then release the button. The light will remain lit up for 5 seconds.

Step 2 - You must Short press 1 time (while the LED is still on) and the light will blink 1 time.

Step 3 - Short press 1 more time and the light will blink 2 times.

Step 4 - Short press 1 more time and the light will blink 3 times signaling now it is on MODE 3.

Step 5 - To finish your selection of MODE 3, you need to Long press the button for 5 seconds, till the light go off on the Mosfet, signaling the MODE 3 selection is complete.

Note: If you forget which MODE you configured or you want to double confirm you are in the right MODE, simply short press the button to see how many times the LED light blinks on your Mosfet, after the Step 3 has been completed.

MODE 4 selection (9.6v):

Step 1 - Long press the button on the Mosfet for 5 seconds till the LED lights up and then release the button

Additional Information

FPS Range N/A
Manufacturers BOL Battery Chargers
Barrel Length N/A
PreOrder Lead Time in Weeks N/A
Battery & Charger Included N/A
Accuracy Proven N/A
No reviews have been found

Write Your Own Review

You're reviewing: Swiss Arms Programmable Burst Mosfet V2

  •   1 star 2 stars 3 stars 4 stars 5 stars
    Price
    Value
    Quality
  • Pros
    Enter your Pros, separated by comma

    Cons
    Enter your Cons, separated by comma
+

Customers who bought this item also bought...

You may also like..