JLS Beretta RX-4 STORM Airsoft Gun AEG
Availability: In Stock
- Velocity: 360 FPS (0.2 g BB) / Range 150-170 Feet
- Barrel Length: 15 inches / 38 cm
- Magazine Capacity: 300 Rounds
- Integrated Top & Side RIS Rails
- Accepts M4 Magazines
- Battery and Charger Included (Small)
- Accuracy Proven
- Airsoft Gun Review Available - Click More Info
- Made in China
Please visit our Airsoft Maintenance page for information and videos.
JLS Beretta RX-4 STORM Airsoft Rifle Review - Click for more reviews
At first glance, you might think that this was an alien blaster. Believe it or not, this is a real design! This model, the JLS Beretta RX-4 STORM is fitted to accept standard M4 magazines. It is very ergonomic and has an adjustable stock.
The first thing I noticed with the stock extended was that it moved in all directions and I had to super glue the retainer in the receiver to stop most of this movement. However even after being glued there was still a bit of play on the stock. The safety and selector switches located next to the trigger. The safety is a bar type similar to a L85 and the selector is pushed up for auto and down for single shot. Both are pretty solid and shouldn't give any problems. The hop can be adjusted by pulling the cocking lever backwards and turning the hop dial. This is similar to a M16/M4 hop up.
The magazine is released by a button on the right hand side of the gun and the button on the left hand side is false. I think JLS should have made the release on the left hand side as it means now that to remove the magazine you have to use your trigger hand (if you are right handed).To fit a battery the front fore grip needs to be removed and this is done by removing the large nut at the front of the fore grip and it slides off.
The foregrip will only hold a small battery as the room inside it is limited unless you fancy taking a Dremel to it.
The thread that holds the nut on is held on with super glue so I'm not sure it will stay there however if it comes loose then all you need to do is super glue it back in place.
When I chrono'd the RX4, it was firing at 380 FPS and I decided to fit another spring to bring the FPS down to sub 350 FPS.
To get to the gearbox you need to remove the stock, the pistol grip, front foregrip and then split the receiver in half. There are quite a few springs and pins etc. That could be lost easily so be careful taking the AEG apart.
The gearbox is a unique design and has a funky motor mount which can swing up
|FPS Range||FPS 301-400|
|PreOrder Lead Time in Weeks||N/A|
|Battery & Charger Included||N/A|
Customers who bought this item also bought...
- $13.99Out of Stock
You may also like..