EcoTarget DIY Airsoft Ice Target
Availability: In Stock
- Place the ECOTARGET MOLD in the freezer BEFORE Filling.
- Assure the mold is level for best results.
- Fill the target cavities to the desired level
- For Stability, Do Not Overfill
- After targets are frozen solid, remove the mold from the freezer and let it rest for 3-4 minutes at room temperature before removing the targets.
- Hold the mold up-side-down over a towel and twist gently at opposite corners.
- Store your new targets in the freezer until it is time to shoot.
|MAP Controlled Item||No|