Gear Box, Mech Box, Full Tune Up Kit

View as Grid 
View as List
Compare
  1. Airsoft AEG Rifle 20A 250V 30mm Fuse

    Airsoft AEG Rifle 20A 250V 30mm Fuse
    - Current: 20 Amp
    - Voltage: 250 Volt
    - Fuse Type: Slow Blow
    - Dimension: 6x30mm
    - RoHS Compliant
    $0.99
  2. Deep Fire SIG551 SIG552 M120 Tune Up Kit

    Deep Fire SIG551 SIG552 M120 Full Tune Up Kit
    - 120SP Tempered Spring
    - Steel Cylinder
    - 6mm Steel Oiless Bearings
    - Air Seal Nozzle
    - Ultra Lightweight Cylinder Head
    - Titanium Piston
    - Nylon Tappet Plate
    - Spring Guide w/ Ball Bearing
    - Ball Bearing Piston Head w/ O-Ring
    $109.99
  3. DeepFire V2 Front Wired Torque Mechbox

    DeepFire V2 Front Wired Torque Mechbox
    Specifications:
    - Complete Gearbox with Titanium Internals
    - Deans Type Connector Included
    - M100 Spring Installed
    - Compatible with Marui Based Front Wired M4/M16

    Upgrading AEG's will require taking apart gun and replacing internal which will void the standard warranty.
    $249.99
  4. DeepFire V2 Rear Wired Torque Mechbox

    DeepFire V2 Rear Wired Torque Mechbox
    Specifications:
    - Complete Gearbox with Titanium Internals
    - Deans Type Connector Included
    - M100 Spring Installed
    - Compatible with Marui Based Rear Wired M4/M16

    Upgrading AEG's will require taking apart gun and replacing internal which will void the standard warranty.
    $249.99
  5. Lonex Siver Plated Upgrade Wire

    This is a MAP Controlled Item.
    Lonex Siver Plated Wire Upgrade
    This highly conductive and anti-heat silver plated wire matches the Japanese specifications, so it can be installed easily.
    $14.99
  6. Lonex Steel Upgrade Trigger for G3

    This is a MAP Controlled Item.
    Lonex Steel Upgrade Trigger for G3
    Features:
    - Compatible with standard G3 Gearboxes
    - Similar form to stock triggers
    - Reinforced for Durability and Extended Use
    $9.99
  7. Lonex Steel Upgrade Trigger for M16

    This is a MAP Controlled Item.
    Lonex Steel Upgrade Trigger for M16
    Features:
    - Compatible with standard M16 or M4 Gearboxes
    - Similar form to stock triggers
    - Reinforced for Durability and Extended Use
    $9.99
  8. Lonex Steel Upgrade Trigger for MP5

    This is a MAP Controlled Item.
    Lonex Steel Upgrade Trigger for MP5
    Features:
    - Compatible with standard MP5 Gearboxes
    - Similar form to stock triggers
    - Reinforced for Durability and Extended Use
    $9.99
  9. Systema MP5 Airsoft Gear Mech Box M120

    Systema Complete Mecha-Box for MP5 Series (A4, A5, SD5, SD6)
    - Complete Drop In Gear Box for Full Stock Rear Battery MP5 with M120 Upgrade Spring for 370 - 400 FPS
    - All internal parts completed upgraded with Systema Parts (gears, bearings, tappet late, cylinder, bearing spring guide rod, selector plate, low resistance wires)
    - Completely Reinforced Heavy Duty Alloy Gear Box
    - Includes Torque Up Gear Set with Teflon Cylinder
    $239.99
  10. Systema MP5 Energy Gear Box M150

    Systema Complete Energy Mecha-Box for MP5 Series (A4, A5, SD5, SD6)
    - Complete Drop In Gear Box for Full Stock Rear Battery MP5 with M150 Upgrade Spring for 470 - 500 FPS
    - All internal parts completed upgraded with Systema Parts (gears, bearings, tappet late, cylinder, bearing spring guide rod, selector plate, low resistance wires)
    - Completely Reinforced Heavy Duty Alloy Gear Box
    - Includes All Helical Super Torque Up Gear Set with Bore Up Cylinder Set
    - Highest Option Possible! Most Powerful!
    $259.99
  11. Systema MP5 Full Tune Up Kit (FTK99-18)

    The ULTIMATE FULL UPGRADE KIT for your MP5! Ver 2 AEG Gear Box
    Includes (Top to bottom): Hexical Gear Set, Selector Plate, Bore Up Cylinder, Silent Piston Head, Silent Cylinder Head, Cylinder Nozzle, Polycarbonate Piston, Ball Bearings, Shims, Anti-reversal Latch, Cut Off Lever, Bearing Spring Guide Rod, M120 Spring
    $149.99
  12. WE Airsoft M4 Closed Bolt Repair Kit

    WE M4 Airsoft Complete Close Bolt Repair Kit
    Kit include:
    - Bolt Carrier Group & Nozzle
    - Trigger Group Assembly
    - Inner Barrel
    - Hop-Up Chamber
    - Dust Cover
    - Bolt Catch

    Please note, kit does NOT include a complete rifle. It only include necessary parts to repair your WE close bolt M4.

    $12.99
  13. WE PDW Selector Switch Replacement

    WE PDW Selector Switch Replacement
    This is a Factory Replacement Selector Switch for the WE Tech PDW Gas Blowback Rifle.
    $4.99
  14. Airsoft Systems Control Unit for Gearbox Version 2 Gen. 4

    Features:
    - Always completes full cycle of the gearbox.
    - No gearbox jams.
    - Crisp and realistic trigger feel.
    - Reduced realistic trigger travel.
    - Faster trigger response.
    - Increased rate of fire.
    - Increased battery life.
    - Increased main spring life.
    - 4 selectable firing modes.
    - Compatible with all kind of batteries, gears and springs.
    - Battery deep drain protection integrated.
    - Safe for LiPo batteries with automatic power cutoff.
    $99.95
    Out of Stock
  15. AS Tactical CNC Aluminum V3 Gearbox

    AS Tactical CNC Aluminum V3 Gearbox
    The AS Tactical CNC Aluminum V3 Gearbox Shell is a great platform to replace your stock gearbox, or build your own custom from the ground up. Made of CNC Aluminum, this Gearbox keeps the weight low, while maintaining excellent durability.
    - OEM for AirSplat by SHS
    $109.99
    Out of Stock
  16. AS Tactical V2 Quick Change Gearbox

    Not yet rated
    AS Tactical V2 Quick Change Gearbox
    Features:
    - Rear Wired
    - Quick Change Spring System
    - Complete Drop In Upgrade for any Version 2 AEG
    - OEM for AirSplat by SHS
    $69.99
    Out of Stock
  17. BOL BURST Programmable AEG Mosfet

    BOL BURST Programmable AEG Mosfet
    Easily program your AEG to fire in Burst Mode with a simple trigger pull system.

    Instructions:
    - With the BOL Burst Mosfet connected to your Gun and Battery, select Full Auto on your AEG and hold the trigger down.
    - Keep the trigger pulled until the Burst Mosfet makes 3 short BEEPs.
    - Pull the trigger for the desired number of shots per burts. (3 pulls equals 3 round burst).
    - Once burst is selected, hold the trigger until the BOL Burst Mosfet makes 1 continuous BEEP.

    Whith those simple steps, your Mosfet is now programmed.
    $34.99
    Out of Stock
  18. Burst Wizard King Kong Super 2 Mosfet D

    Burst Wizard King Kong Super 2 Mosfet - DEANS Version
    With the New Burst Wizard King Kong ELITE Mosfet unit, you can customize your AEG on a whole new level. This Mosfet unit functions as a Plug&Play unit via DEANS Plug, or is capable of being hard wired in.
    Easily program the Mosfet Unit with Trigger Commands:
    - Multiple Burst Modes
    - Determine and Adjust Rate Of Fire
    - Full Auto Delay
    - Magazine Change Delay
    - Check Battery Voltage
    Specifications
    - Hardwired and plug-and-play compatible
    - Unit Measurements: 1.3"L x 0.6"W x 0.35H
    - Cycle-gear Burst for 1 to 9 round burst and makes your gearbox last longer
    - Resume to fullauto funciton
    - Adaptive resettable fuse
    - MILSIM features
    - LIPO & LiFePO4 battery low voltage protection
    - ROF reduction mode
    $39.99
    Out of Stock
  19. Burst Wizard King Kong Super 2 Mosfet T

    Burst Wizard King Kong Super 2 Mosfet - Tamiya Version
    With the New Burst Wizard King Kong ELITE Mosfet unit, you can customize your AEG on a whole new level. This Mosfet unit functions as a Plug&Play unit via TAMIYA Plug, or is capable of being hard wired in.
    Easily program the Mosfet Unit with Trigger Commands:
    - Multiple Burst Modes
    - Determine and Adjust Rate Of Fire
    - Full Auto Delay
    - Magazine Change Delay
    - Check Battery Voltage
    Specifications
    - Hardwired and plug-and-play compatible
    - Unit Measurements: 1.3"L x 0.6"W x 0.35H
    - Cycle-gear Burst for 1 to 9 round burst and makes your gearbox last longer
    - Resume to fullauto funciton
    - Adaptive resettable fuse
    - MILSIM features
    - LIPO & LiFePO4 battery low voltage protection
    - ROF reduction mode
    $37.99
    Out of Stock
  20. Deep Fire MP5 M120 Full Tune Up Kit

    Great M120 Full Tune Up Kit / Upgrade Kit for for your AK! AEG Gear Box
    Includes : Nozzle (CPN01P), Cylinder Head (CPC03), Cylinder (CPC14), Piston Head (CPP14A), Piston (CPP19), Spring Guide Rod (CPO06), Bushings (CPO16), Tappet Plate (CPO31) M120 Spring
    $109.99
    Out of Stock
  21. Lonex AKS74U Gearbox Upgrade Set SP120

    This is a MAP Controlled Item.
    Lonex AKS74U Full Gearbox Upgrade Set 120
    Features:
    - Complete Drop In Gearbox for AK Style Rifles
    - Compatible with most Metal Receiver brands on the market


    Gearbox Components:
    - 3nd Generation Super Gearbox
    - Air Seal Nozzle
    - Enhanced Tappet Plate
    - Aluminum Cylinder Head
    - Steel Cylinder
    - Aluminum Piston Head
    - Enhanced 10 Steel Teeth Piston
    - SP120 Tune Up Spring
    - Steel Ball Bearing Spring Guide
    - Heat Resistant Electric Switch
    - Original Ratio Enhanced Gears
    - Enhanced Anti-Reversal Latch
    - Enhanced Trigger
    - Anti-Heat Selector Plate for M16 Series
    - Cut Off Lever
    - Safety Cover
    - 8mm Ball Bearing
    - Gear Box Spring Set for
    - Shim Set
    - Teflon Gear Grease
    $199.99
    Out of Stock
  22. Lonex Steel Upgrade Trigger for AK

    This is a MAP Controlled Item.
    Lonex Steel Upgrade Trigger for AK
    Features:
    - Compatible with standard AK Series Gearboxes
    - Similar form to stock triggers
    - Reinforced for Durability and Extended Use
    $9.99
    Out of Stock
  23. MODIFY M4-A1 Hi-Speed Complete Gear Box

    MODIFY M4-A1 Hi-Speed Complete V2 Gearbox
    Include:
    - M100 Spring
    - Rotary Spring Guide
    - Tappet Plate
    - Modular Gear Set (16.32.1)
    - Seletor Plate
    - PolyCarb Piston
    - PolyCarb Piston Head w/ Bearing
    - Air Nozzle w/ Oring
    - Steel 8mm Bushings
    - Anti-Reverse Latch
    - Modify 8mm Torus Mechbox Shell
    - Aluminum Type 1 Cylinder
    - Aluminum Cylinder Head
    - Cut Off Lever
    - Low Resistent M4 Wiring Harness
    - Front Wire Switch Assembly
    - T-Connector (Not Installed)

    Features:
    - Fluted gearbox casing increases strength, reduces weight & dissipates heat more efficiently, allowing Torus to run cooler than conventional gearboxes.
    - Inspection ports allow for instant visual checks of the gearbox internals & enable lubrication without disassembly.
    - Oversized, high-torque screws ensure a secure fit & prevent loosening of gearbox & components.
    - Torus gearbox features unique internal & external reinforcement to address the problem of front-end cracking previously encountered in V2 gearboxes.
    - Perfect lubricant fillister along the side of the tappet plate will ensure a smooth operation inside the gearbox.
    - Redesigned grooves on the front-end of the tappet plate gives an absolutely flawless performance inside the gearbox.

    $219.99
    Out of Stock
  24. MODIFY M4-A1 Hi-Torque Complete Gear Box

    MODIFY M4-A1 Hi-Torque Complete V2 Gearbox
    Include:
    - M120 Spring
    - Rotary Spring Guide
    - Tappet Plate
    - Modular Gear Set (21.6)
    - Seletor Plate
    - PolyCarb Piston
    - PolyCarb Piston Head w/ Bearing
    - Air Nozzle w/ Oring
    - Steel 8mm Bushings
    - Anti-Reverse Latch
    - Modify 8mm Torus Mechbox Shell
    - Aluminum Type 1 Cylinder
    - Aluminum Cylinder Head
    - Cut Off Lever
    - Low Resistent M4 Wiring Harness
    - Front Wire Switch Assembly
    - T-Connector (Not Installed)

    Features:
    - Fluted gearbox casing increases strength, reduces weight & dissipates heat more efficiently, allowing Torus to run cooler than conventional gearboxes.
    - Inspection ports allow for instant visual checks of the gearbox internals & enable lubrication without disassembly.
    - Oversized, high-torque screws ensure a secure fit & prevent loosening of gearbox & components.
    - Torus gearbox features unique internal & external reinforcement to address the problem of front-end cracking previously encountered in V2 gearboxes.
    - Perfect lubricant fillister along the side of the tappet plate will ensure a smooth operation inside the gearbox.
    - Redesigned grooves on the front-end of the tappet plate gives an absolutely flawless performance inside the gearbox.

    $209.99
    Out of Stock
  25. Swiss Arms Programmable Burst Mosfet V2

    Swiss Arms Programmable Burst Mosfet V2
    Features:
    - Progammable 2-12 Shots and Burst Fire
    - 7.4 and 11.1 lipo Compatible
    - 8.4 and 9.6 Nimh/Nicad Compatible
    - 4 Settings for Optimal Performance at Any Voltage

    Instructions:
    Step 1 - Long press the button on the Mosfet for 5 seconds till the LED lights up and then release the button. The light will remain lit up for 5 seconds.

    Step 2 - You must Short press 1 time (while the LED is still on) and the light will blink 1 time signaling now it is on MODE 1.

    Step 3 - To finish your selection of MODE 1, you need to Long press the button for 5 seconds, till the light go off on the Mosfet, signaling the MODE 1 selection is complete.

    Note: If you forget which MODE you configured or you want to double confirm you are in the right MODE, simply short press the button to see how many times the LED light blinks on your Mosfet, after the Step 3 has been completed.

    MODE 2 selection (7.4v):

    Step 1 - Long press the button on the Mosfet for 5 seconds till the LED lights up and then release the button. The light will remain lit up for 5 seconds.

    Step 2 - You must Short press 1 time (while the LED is still on) and the light will blink 1 time.

    Step 3 - Short press 1 more time and the light will blink 2 times signaling now it is on MODE 2.

    Step 4 - To finish your selection of MODE 2, you need to Long press the button for 5 seconds, till the light go off on the Mosfet, signaling the MODE 2 selection is complete.

    Note: If you forget which MODE you configured or you want to double confirm you are in the right MODE, simply short press the button to see how many times the LED light blinks on your Mosfet, after the Step 3 has been completed.

    MODE 3 selection (8.4v):

    Step 1 - Long press the button on the Mosfet for 5 seconds till the LED lights up and then release the button. The light will remain lit up for 5 seconds.

    Step 2 - You must Short press 1 time (while the LED is still on) and the light will blink 1 time.

    Step 3 - Short press 1 more time and the light will blink 2 times.

    Step 4 - Short press 1 more time and the light will blink 3 times signaling now it is on MODE 3.

    Step 5 - To finish your selection of MODE 3, you need to Long press the button for 5 seconds, till the light go off on the Mosfet, signaling the MODE 3 selection is complete.

    Note: If you forget which MODE you configured or you want to double confirm you are in the right MODE, simply short press the button to see how many times the LED light blinks on your Mosfet, after the Step 3 has been completed.

    MODE 4 selection (9.6v):

    Step 1 - Long press the button on the Mosfet for 5 seconds till the LED lights up and then release the button
    $21.99
    Out of Stock
  26. WE M92 Replacement Trigger Assembly

    WE M92 Replacement Trigger Assembly
    This is a Factory Replacement Trigger for the WE Tech M92 Gas Blowback Pistol Series.
    $4.99
    Out of Stock
View as Grid 
View as List
Compare