VFC SCAR Tan Airsoft Electric AEG Gun
- 360 fps (0.2 g BB) / Range 160-180 feet
- Barrel Length: 12 inches / 30 cm
- Magazine Capacity: 120 Rounds
- Flip Up Front & Rear Sights
- Metal Upper Receiver
- Battery & Charger Not Included
- Airsoft Gun Review Available - Click More Info
- Made in Taiwan
Please visit our Airsoft Maintenance page for information and videos.
The VFC SCARs is one of the best SCAR replicas on the market. Its finish is on par with that of a real SCAR and is extremely similar in weight and feel. It features a full rail system, and a working bolt stop and bolt catch. The internals are all top-notch so there is no upgrading required besides the spring if you need it to shoot a little harder.
*Please note the review below is for the SCAR Heavy version.
Adjustable Cheek Rest / Polymer Lower Receiver / Functional Bolt & Release / Realistic Magazine Exterior / Replica SCAR Trigger / Flip-Up Front & Rear Sights / Adjustable Side Folding Stock / Integrated Uninterrupted Top Rail / Ambidextrous Magazine Release Selector
When the box arrived the outside appearance was great and it felt very solid.
Here’s what you get when you open it. I was surprised to see that the gun was only cushioned by some foam blocks and nothing else.
Here's some stickers that you get with it
This gun includes a 500-rd Hi-cap magazine that is very well put together and has a nice finish.
The magazine differs from other 7.62 magazines. It is uniquely shaped and is VFC’s personal design. The hi-caps are only available now. To my knowledge this gun will not accept other magazines like the SR-25 and It has a unique guide rail on the back which matches the magwell of the gun.
The VFC SCAR-H Gen. III.
The VFC SCAR-H at the moment only comes in the CQC (Close Quarters Combat Version) version, but you can buy aftermarket barrels to either make it the SV (Sniper Version) or STD (Standard Version) Version. The Conversion barrel for the CA SCAR is compatible with this gun if you prefer the standard version. Appearance and feel: The paint finish on the upper receiver is very smooth and slick. It is made from CNC machined aluminum and is very light. The lower receiver, pistol grip, and stock are made from a material called glass-filled Unlike other scar replicas the colors of the parts on the gun closely match.
The gun comes standard with the CQC barrel with an abnormally long flash hider compared to regular M4 flash hiders.
Some of you might want to replace it, but since I got the HK version it also came with a nice detailed aluminum silencer that goes right over the flash hider.
In addition the HK version scar comes with the FN Herstal trademarks where as the US version does not. This gun is very solid and light with no unwanted squeaks or rattles.
Out of the box the gun shoots 350fps+. The guns operation is very quiet and smooth. With a 9.6v 1600mah battery the gun has a nice 1200rpm+. The mags feed nice and smooth and can apparently handle the increased ROF. I have learned that this gun comes with VFC’s self shimming gears, plastic spring guide, and plastic bushings which you will want to replace ASAP. The gun is very easy to dismantle and put back together. The wiring in the stock is overly extensive, cheap looking (thin), and has a giant fuse so that will need to replaced also.
The good thing about this gun is that is has no wires connecting the stock to the gearbox. It has hidden connectors in the hinge of the stock that connect the battery to the gearbox.
The gun is very accurate from 150ft away and has nice groupings. The hop-up is a clear plastic 2 piece hop-up that is very easy to adjust with the tool that detaches from the end of what would be the gas tube. This tool also takes apart most of the screws on this gun. I have heard around that this gun comes with a 6.05 tight bore stock. I am not sure if it’s true but it sure looks like it. This gun is compatible with most ver.2 gearbox parts and comes standard with their EG1300 motor, and is very quiet. I think the best thing about this gun is the bolt catch. It locks into place so you can adjust your hop-up and you can release it pressing the button above the mag catch tool.
Another good feature about this gun is that this gun can stay in the cocked position.
It has a bolt release located above the mag catch.
The stock is nice and has a two position adjustable cheek piece and a 6 positions for extension. It also can fold and has a very snug fit. Will not come off if shaken or rattled.
Overall the detailing on this gun is amazing and will definitely catch a few eyes on the field. It is the best SCAR replica on the market in my opinion. The gun is very light and maneuverable with very durable materials. The performance is one of the best you can get from a stock gun. The operation is very quiet and smooth. This gun is a must buy for any SCAR fan.
Review by srteelmessenger from Airsoft forum
More Airsoft Gun Reviews
This airsoft gun is not to be misrepresented as a real firearm or gun that is manufactured by FN Herstal and is merely an airsoft gun that fires 6mm pellets. The manufacturer of this airsoft gun is VFC.