SRC M4A1 Carb Electric Airsoft Rifle AEG
- 360 fps (0.2 g BB) / Range 180-200 feet
- Barrel Length: 14.5 inches / 37 cm
- Magazine Capacity: 300 Rounds
- Hard Cary Case Included!
- Full Metal Body and Gearbox
- Battery and Charger sold Separately
- Hard Carrying Case Included
- Made in Taiwan
SRC M4A1 Carb Electric Rifle Manual
Please visit our Airsoft Maintenance page for information and videos.
The SRC M4 Carbine is your standard issue M4. It features a 14.5 inch barrel and a multi-position retractable stock. The carry handle comes in an integrated rear peep sight. It can also be removed for mounting optics or other sights as well. Also included is a military style hard carrying case. It is foam lined on the inside to project your rifle from the bumps along the road.
This is a review on the SRC M4A1 Carbine.
This rifle was supplied by Airsplat.com
UPDATE: Airsplat has these for $240 now. This is a really good deal.
The rifle retails for $304 and comes with a hard case, 300 rnd hi-cap and full metal body.
Part1: Initial impression.
OK, so I received the airsoft gun on Thursday at work around 12:30. I sure got some funny looks from the girls up front. "is that a real gun," of course then I had to explain to them what airsoft is. "Its like paintball but much cooler" I say as I heft this rather large box over my shoulder and head for my office. So all afternoon I had to stare at this box, just wanting to open it up and take a look. Well, I finally get home and go straight to my garage and tear into it. First thing I notice, wow that's a nice case. These SRC airsoft guns all come in their own cases.
My first impression when I take it out of the case is the weight, it feels really heavy. Right away I set up the chrono, fill the hi-cap and the first rounds out of it are through the chrono.
The 3 samples I took were:
Here are some close up pictures of the AEG.
After that I played around with it, to get a feel for the AEG.
Here are some of my observations: The stock was a bit wobbly. I had to put some 100 mph tape on the buffer tube to eliminate the stock wobble.
Notice 100 mph tape on buffer tube
One other thing of note is that the fore grips are about a quarter inch shorter than TM and CA fore grips. So they are not compatible for upgrades. If you wanted to put a RIS or something on there you would have to either buy SRC parts or do some extensive mods to your front end. I have an 8.4V nun-chuck battery that I use in my CA M4 and I had to cram it in pretty good to get it to fit in the SRC front end.
Electrical tape to hold the bulging for grips together.
One of the things I really like about the airsoft gun is the stock, after I fixed the wobble issue. The LE style stock is a little longer and fits on the shoulder higher than a standard M4, so you don't have to lean your head in as much to sight in.
LE Style Stock
Another thing of note was the black hi-cap that came with it. This clashed with the grey body of the AEG. The only minor issue I found with the body was the gap between the upper and lower receiver where the meet at the rear.
After I messed around with it for a bit I decided its time to shoot some trees. I took it out into my yard, slapped in the hi-cap and shot a few rounds out of it in semi auto to see where the hop-up was at.
It wasn't. They were dropping hard about 40 feet out. Better fix that, so I pulled the charging handle back to reveal the metal hop-up under the dust cover. The charging handle is very tough to pull back and it doesn't quite pull the black cover all the way back. I found that I had to stick my finger in there and help it back a little so the hop-up was more accessible.
After some fine tuning I got the hop-up pretty much dialed in. This hop-up is very sensitive. Just a little too far and the BBs are going straight up in the air. Not enough and they are dropping right in front of me. It took me a few tries to get it just right. The range on the hop-up is good, about 130 feet. After I got the hop-up dialed in I decided to chrono it again. This time it was right around the 280 mark.
The AEG had a real nice sound to it when it shot, nice clean sounding action. Crisp is a word that comes to mind.
Part2: Skirmish results
Well, I have spent a lot of time playing this airsoft gun and I am impressed. It has held up very nicely. It has seen at least a half dozen skirmishes at Strikezone and 2 outdoor skirmishes. One of the skirmishes was at Scappoose in the snow and the temp was right around 40 degrees. It was pretty cold. No problems with the airsoft gun or hopup. It never missed a beat or gave me any issues. It feels very solid and takes the punishment.
Overall this airsoft gun performed the way I expected a airsoft gun to perform. There were a couple minor cosmetic issues and the hopup is a little too sensitive. Is it worth the $300? For the same price you can get a CA M15A4, which are known to be a very reliable and solid airsoft gun. But with the added bonus of the case, and it is a very nice case that makes it almost worth the price. There are some complete packages on airsplat.com for around $345 and up. These would make good starter packages.
In closing I would recommend the SRC full metal Ver.2 line of AEGS. They feel solid, have a nice weight and perform well outdoors and indoors. I will update this review in a few months when I have beat up this airsoft gun to the point where its time to perform internal upgrades.
This airsoft gun is not to be misrepresented as a real firearm or gun that is manufactured by Colt and is merely an airsoft gun that fires 6mm pellets. The manufacturer of this airsoft gun is SRC.