- Spring Airsoft Replica Pellet Rifle
- 352 fps (0.12 g BB)
/ 130-160 feet
- Full Trademarks
- Collapsible Rear Stock
- Hop Up
- Capacity: 50 Rounds
- Made in Philippines
Soft Air DPMS Panther Arms AR15 Rifle Manual
Fully authorized DPMS/Panther Arms trademarks make this piece as realistic as the come. The magazine can be loaded quickly and easily with the included loading tool. Featuring a tight-bore barrel for increased accuracy in a compact size, this is a true all-around solid rifle.
The original AR-15 rifle is a gas operated, selective fire, magazine fed weapon. Every rifle from the M16 family is generally the same, but most civilian AR-15 type rifles are semi-automatic only.
The heart of the AR-15 is the direct gas system, developed by the Eugene Stoner in the early 1950s. This system uses no conventional gas piston and rod to propel bolt group back after the shot is fired. Instead, the hot powder gases are fed from the barrel and down to the stainless steel tube into the receiver. Inside the receiver, the rear end of the gas tube enters into the "gas key", a small attachment on the top of the bolt carrier. The hot gases, through the gas key, enter the hollow cavity inside the bolt carrier, and expands there, acting against the bolt carrier and the collar around the bolt body. The pressure of the gases causes the bolt carrier to move back against initially stationary bolt. The linear rearward movement of the carrier initially transferred into the rotation of the bolt, via the cam slot in the bolt carrier and the cam pin, attached to the bolt, that followed the slot. As soon as the bolt is rotated to unlock from the barrel, the bolt group continues its rearward travel under the inertia and the residual pressure in the barrel, extracting the spent case and compressing the buffer return spring, located in the butt stock. The forward movement of the bolt group first strips the fresh cartridge from the magazine and, on the final stage of the movement, rotates the bolt to lock into the barrel extension. The bolt has 7 radial locking lugs, eight lug is located on the extractor claw. Since the introduction of the XM16E1 rifle, the forward assist device is used on all military and most civilian AR-15 type rifles. This device consist of the spring-loaded button with internal claw, that engages the serrations on the right side of the bolt carrier to push it forward, if the pressure of the return spring is insufficient to do so (for example, due to the fouling inside the receiver or chamber). The rifle will not fire unless the bolt is locked and the bolt carrier is in its forward most position. The bolt carrier and the bolt itself are chrome-plated. Another feature of the AR-15 type rifles is the bolt catch device, that locks the bolt group in the open position when the last round is fired. To release the bolt group one must push the button, located at the left side of the receiver, above the magazine. The "T"-shaped cocking handle is located at the rear of the receiver, above the butt stock, and does not reciprocate when gun is fired.
" Caliber: .233 Remington, 5.56 x 45 mm NATO (many other variants are made)
" Length: 39 in (991 mm)
" Mass: 3.4 kg (7.5 lb)
" Barrel: 20 in (508mm) Standard, 16 in (406 mm) and 14.5 in (368mm) common
" Rifling: Earliest models had a 1:14 rate of twist, which was changed to 1:12 for original 55 grain (3.6 gram) bullets. Newer configurations use 1:9 and 1:7 twist rates
" Magazine capacity: 5, 10, 20, 30, 40, 90, 100
This airsoft gun is not to be misrepresented as a real firearm or gun that is manufactured by DPMS and is merely an airsoft gun that fires 6mm pellets. The manufacturer of this airsoft gun is Soft Air.