*Bravo Advanced Mosfet Unit #1 Basic
-MOSFETs are fully protected against voltage spikes from the motor
-Fully protected against static discharge
-The circuit draws no current when not triggered
-The trigger circuit needs considerable current to turn on preventing false firing from condensation, grease etc.
-High tolerant to bad wiring, bad layout, noise etc
-New high current capacity 3.5mm gold plated bullet connectors included for easy connection to the MOSFET
-Uses surface mounted parts to minimize size
-2.5 ft. AWG#16 wires included
-2ft AWG#24 signal wires included
-T-connectors and shrick wrap Included
-Size: 35mm x 17mm x 8mm (will fit in a 19mm diameter tube)
-Voltage Range: Accepts from 7.0v to 25.0v
-Power: Rated for 500amps peak, 60amps continuous.
-This MOSFET is highly recommended for High Rate of Fire AEGs. Expert Use Only!
| Best Industry Return / Warranty Policy |