NcStar Red & Green Laser w/ Weaver Mount

NcSTAR Red & Green Laser w/ Weaver Mount
- Green and Red laser integrated into single laser body
- Utilizing single windage and elevation adjustment for both lasers
- Weaver Style Mount Included
- Twist Bezel to Change Laser
- External Windage & Elevation controls
- Standard On/Off Switch, Coil Pressure Switch, Mount, and CR123A Battery Included
- All Aluminum Construction

SPECIFICATION:
- Wavelength: 532 nm (Green), 635-655 nm (Red)
- Maximum Output Power: <5mW (Green), <2mW (Red)
- perating Voltage: 3V DC
- Battery type: CR123A lithium (only one required)
- Line Width: <0.1 nm
- Beam Divergence: <1mrad
- Beam diameter: <1 mm
- Operation Current: <300mA
- Operating temperature: 59 - 95 degrees Fahrenheit
- Overall Length: 5.11" Height: 1.74" Width: 1.30" Weight: 7.4 oz
- Laser body Diameter: 30mm

NcSTAR Red & Green Laser with Universal Rifle Barrel Mount. You get 2 ways to optimize your shooting capability! Find your mark with ease using this NcSTAR Red and Green Laser! Simply twist the bezel for a seamless transformation between the "anytime" 5mw red laser and 2mw green laser for improved daylight visibility. Whether you're at the range practicing or in the line of work that requires such equipment, you'll know where your shots are going to end up even before you fire. It's built with all-aluminum construction too... hard knocks won't slow this bad boy down. Easily switch the laser on / off with your choice of momentary or full shutoff on the cap. There's a coil pressure switch included as well! Comes equipped with a universal with mounting tool. CR123A battery included.

Customer Reviews