Leapers 4X32 Mil-Dot Mini Rifle Scope

- 4X32 Mini Mil-Dot Airgun Scope with Sun Shades
- 4 X Magnification & 32 mm Scope Aperature
- Range Estimating with Mil-Dot Feature
- Tube Diameter of 1 Inch
- Rugged One Piece Tube Construction for All Terrains and Weather
- Sealed Windage and Elevation Housing
- Elevation / Windage Adjustment w/ Finger Adjustable Turrets
- Dynamic and Compatible with All Airsoft Usage or Needs
- Perfect Entry Level Magnifying Mil Dot Scope for Airsot or Air Guns

• Range estimating requires common knowledge/experience about your target’s actual width or height.


• 1 mil in a scope reticle is the distance from the center of one dot to the center of the next dot.


• Set your scope at the highest power. View the target through the scope. Place the center of the dot against one edge of the target and measure to the opposite edge of the target.


• Once the target has been measured in mils, use one of the formulas below to estimate the distance of the target: (Refer to the product specs table for correct formula of each model.) For example, based on past experience, the length of a known animal from shoulder to tail is 40 inches (1.016 meters), and we see through our mil-dot scope to find that it occupies 5 mils. Therefore, the distance using Formula A = (1.016 x 1,000) / (2 X 5) = 101.6 meters (110 yds)
  NOTE: (1 M = 1.0936 Yards)


• Scopes come with range estimate tables for easy reference.

Formula A	(Height or Width of Target in Meters) x 1,000	= Range in Meters
	2 x (Height or Width of Target in Mils.)
Formula B	(Height or Width of Target in Meters) x 1,000	= Range in Meters
	Height or Width of Target in Mils.
Formula C	(Height or Width of Target in Meters) x 333	= Range in Meters
	Height or Width of Target in Mils.

Customer Reviews