WE 1911 4.3 Gas Blowback Gun TAN
- Velocity: 300 fps (0.2 g BB) / Range 60-70 feet
- Barrel Length: 4 inches / 10 cm
- Magazine Capacity: 15 Rounds
- Working Thumb and Grip Safety!
- Full Metal
- Single Stack Style Magazine
- G10 Style Grip
- Built-In Rail System
- Accuracy Proven
- Airsoft Gun Video Review Available - Click More Info
- Made in Taiwan
WE 1911 4.3 Gas Blowback Gun TAN Manual
This 1911 is extremely realistic. The full metal construction and its single stack design make it feel like the actual thing. It features working thumb and grip safeties like the real thing.
More AirSplat ON DEMAND Airsoft Gun Video Reviews
WE 1911 4.3 Desert Warrior GBB Pistol Review -Click for more reviews
Table of Contents:
I've been a fan of WE's Airsoft pistols since their first models, and I've watched them improve throughout the years, creating better and better guns. One of their latest GBB pistols is the 1911 4.3 Desert Warrior, a tactical 1911 model with a shortened barrel and tan finish. I will discuss all of the good and bad points of this unique pistol in this review! For those that just want to see a video, here is one I made for this pistol:
I was able to obtain this model from AirSplat. The Airsoft gun was shipped out within 24 hours, and I received it a few days later, via UPS Ground, which is Airsplat's free shipping option for orders over $150. I always recommend checking out your retailers coupon/discount section, as most will have a deals like free shipping, saving you a few bucks on your order!
The Airsoft 1911 comes packaged in a plain cardboard box, with a white foam insert covered in black fabric. WE tends to line their boxes in fabric, to make for a better presentation. It's a small touch, but still a nice one!
The Airsoft gun comes as a pretty bare bones package, only including the Airsoft pistol, a single magazine, and a fairly detailed manual. You will need to provide your own gas, BBs, and silicone lube to use the Airsoft gun, but these are things that most airsofters will have anyways.
Weight: 1.6 lbs
Sight Radius: 6"
Like all current WE pistols, the Desert Warrior is full metal, with the only plastic parts being the grips. It is a well balanced gun that fits well in your hands, and like all 1911s, has a fairly steep grip angle, which is how I personally prefer my pistols. The Airsoft gun is finished in a matte tan finish, which has held up to my abuse so far without any scratches.
One of the first things you notice on this Airsoft pistol is the G10 style grip that has been installed from the factory. These grips are made of hard plastic, and provide plenty of grip, with one minor issue that I've come across. Most 1911 grips are beveled down at the bottom, to prevent a rough edge from hitting the bottom of your palm. On these, the grips come straight down, and the dimples almost form a slight serration, which can irritate your hands if you aren't using gloves. I remedied this by going over the bottom edge with some sandpaper to smooth and round out the bottom of the grip. The magwell is slightly beveled to aid in loading your magazine.
The front and back strap of the grip have pretty aggressive checkering, which further add to the high friction grip. The back strap also has a grip safety with extended beavertail, which is very easy to activate when firing the gun.
The controls are located on the frame, and consist of the trigger, magazine release, slide lock, and ambidextrous safety levers. The controls are all black in color, with the exception of the trigger, which is silver. The ambi safety only clicks into safe when the gun is cocked, like all 1911s. The slide lock doubles as the disassembly lever, which I will explain in detail in the internals section. Like almost all 1911s, the single action trigger pull is light and smooth; the stuff dreams are made of.
Right sided safety
Buttery smooth trigger
Being a single action Airsoft pistol, the hammer must be cocked back before the gun will fire. Now, when you rack the slide, the hammer will be cocked initially, and the blowback action will recock the hammer with every shot. You can manually lower the hammer to half cocked, and to fire, you would need to pull it back fully, then pull the trigger.
The front of the frame has a removable metal 20mm rail, allowing you to mount up lights, lasers, grips, or whatever else you can fit on it. It is removable using the two internally mounted phillips head screws, accessible after removing the slide. I would recommend adding some loctite to these screws to prevent the recoil from loosening them on their own.
The slide is metal, and features front and rear serrations to aid in cocking the gun. This slide is designed to use a bushingless barrel design, so disassembly is a little different compared to other 1911s, which I will discuss in the internal section of the review.
No front bushing
The outer barrel is a flared design, to accommodate the lack of a barrel bushing. It is 4.3" in length, indicating this as a 4.3 model. The orange tip is a plastic plug forced into the muzzle, which I removed for this review. Threaded barrels are available at various retailers, if you wish to mount a can or tracer unit.
Silver barrel and guide rod
The iron sights are adjustable for windage, but not elevation. The rear sight is detachable, and is adjusted by loosening the flat head screw, and sliding it side to side. The front sight is molded into the slide, and has a spot for a dot, which is not painted.
The Desert Warrior is devoid of any trademarks, aside from a single ".45 ACP" marking on the outer barrel. It had a "Made in Taiwan" sticker located on the frame, which I removed for this review.
The included magazine is a single stack design which holds 15 rounds. It is compatible with other WE 1911 magazines, so spare mags are plentiful. The bottom of the mag has a metal bumper, which may require an extension for some gas cans to fill it, but I don't have any issues with my AI propane adapters.
Baseline performance at about 80 degrees, using Airsplat .20g BBs, powered by propane after a 100 round break in period is as follows:
Slow Fire - One shot every 20 seconds until empty
High FPS: 321.5 FPS
Low FPS: 307.8 FPS
Average FPS: 315.5 FPS
Rapid Fire - One shot every half second until empty
High FPS: 320.9 FPS
Low FPS: 288.6 FPS
Average: 301.4 FPS
The Airsoft gun did exhibit some magazine cooldown, as to be expected with a full metal GBB pistol, however, in a rapid fire test, I was able to get 31 shots off of a single gas fill, showing that it still does have pretty good gas economy.
Range and accuracy were pretty much standard for a pistol, giving me torso kills at 90' 85% of the time. It's a sidearm, and it functions well in that regard. A tightbore barrel, or even a longer tightbore ran through a can would give better results.
One thing I love about 1911s is the fact that they can be disassembled without any tools, and in a matter of seconds. First, you must remove the magazine, and then pull the slide back to the point indicated below. You can then push out the slide lock lever.
Pull the slide back to here, then remove the slide lock
With the slide lock removed, you can pull the slide forward and off of the frame. At this point, you can lubricate the essential parts of the gun to keep it running properly.
You can further disassemble the slide into its main components by first removing the guide rod and spring. You must pull back on the front of the guide rod assembly, while pushing the actual rod forwards as well. With some practice, it can be done in seconds. You can then push the barrel out the front of the slide and remove it.
Shot into barrel
The blowback assembly is plastic, with a metal piston head, giving it good reliability. Keep this area well lubed, and the Airsoft gun will run like a top.
Metal piston head
Some users have reported issues with WE 1911 pistols, including having the hammer get locked inside the slide during firing. I have not encountered this problem personally, however, it is something to look out for.
Since it's an Airsoft 1911, you have plenty of options as far as modification goes, but in all honesty, the gun is almost perfect as is. I'd recommend sanding the bottom of the grips to prevent discomfort, and maybe adding a threaded barrel, but otherwise, I think it's gorgeous. The rail allows you to mount accessories, such as lights and lasers, and it really adds to the look of the gun. Other than that, painting the front sight dot would be a good idea, and would aid in target acquisition.
Full metal construction
Good performance for a sidearm
Inexpensive - $110
Rail allows for mounting accessories
Silky smooth trigger pull
Overall tactical look and tan finish sets it apart on the field
Sharp bottom of grip
Black paint finish is a little easy to scratch, but tan finish is rock solid
May need a custom holster to accommodate the rail
I've always been a fan of WE's pistols, and I currently own four of them, and one GBBR, and I've never had any problems with them. If you keep them clean and lubed, they will run and run and run, and deliver solid performance to boot. This Airsoft 1911 is no exception, and I'm happy to add it to my collection. It has claimed its first kills on the field already, and I think it will claim many more before I'm done with it.
Review by Booligan
This airsoft gun is not to be misrepresented as a real firearm or gun that is manufactured by Colt and is merely an airsoft gun that fires 6mm pellets. The manufacturer of this airsoft gun is WE.
| Best Industry Return / Warranty Policy |